Garage_Door_Adapter — GDA_Sensor¶
Source repo: EmbeddedEra/Garage_Door_Adapter
Status: prototype · revision A
Schematic¶
View the real KiCad file directly in the browser via KiCanvas — no export step, no stale PDF.
Board¶
View the real KiCad file directly in the browser via KiCanvas — no export step, no stale PDF.
3D model¶
Drag to rotate, pinch or scroll to zoom, two fingers to pan. Built from the layout with the same 3D models as the renders.
Renders¶
Assembly: top only (18 parts on top, 0 on the bottom, counted from the layout; fiducials, mounting holes and parts excluded from the BOM are not counted).
Top
Bottom
Top isometric
Bottom isometric
InteractiveHtmlBom¶
The InteractiveHtmlBom — for the bench: click a BOM line and the part highlights on the board.
Manufacturing specs¶
| Requirement | Value |
|---|---|
| layers | 2 |
| thickness mm | 1.6 |
| material | FR-4 TG150 |
| copper oz outer | 1 |
| copper oz inner | n/a |
| surface finish | ENIG |
| solder mask | green |
| silkscreen | white |
| min track space mm | 0.2 / 0.2 (0.15 between the pads of U301, the LIS2DH12 LGA-12 land pattern; scoped rule in the .kicad_dru) |
| min via drill mm | 0.3 |
| via treatment | tented |
| impedance control | no |
| castellated holes | no |
| edge plating | no |
| panelisation | single piece, fab may panelise |
| rule file | GDA_Sensor.kicad_dru |
| assembly sides | top |
| assembly type | SMT + THT |
| dnp policy | parts marked DNP in the schematic are omitted from the BOM and CPL |
| notes | none |
Checks¶
Source commit: 2b06d35dd8f161910062efca276adc5ff6c40f40
Last run: 2026-10-31 18:29 on 2b06d35dd8f161910062efca276adc5ff6c40f40 — cached run, hardware and checker unchanged
| File | ERC errors | ERC warnings | DRC errors | DRC warnings |
|---|---|---|---|---|
| hardware/GDA_Sensor/GDA_Sensor.kicad_sch | 0 | 0 | 0 | 46 |
CI ("KiCad checks") unknown for 2b06d35dd8f161910062efca276adc5ff6c40f40: no "KiCad checks" run on this commit.
Releases¶
| Tag | Published | Fab pack |
|---|---|---|
| hw/GDA_Sensor/A | 2026-10-30 | GDA_Sensor-A-fab.zip |
The fab pack zip also has the schematic as a PDF (assembly/*-schematic.pdf) and NeoDen YY1 pick-and-place job files (pnp/*-yy1-top.csv, *-yy1-bottom.csv, and a report).
ERP¶
No product.yml IPN recorded for this board.